Continuous homogenizing silo is used for continuous feeding of raw materials from the top of the silo and discharging at the same time after gas charging and mixing. A cylindrical mixing chamber is set in the center of the silo to reduce the discharging pressure in the silo and eliminate hopper flow. 6-12 discharging holes are set around the mixing chamber and 6-12 charging areas are set between the mixing chamber and the silo wall. During discharging, the raw materials flow to the central chamber in turn. The materials entering the mixing chamber are further mixed due to continuous gas charging in the mixing chamber, so that the qualified raw materials are discharged from the high-level overflow pipe, and the excess gas is discharged from the exhaust pipe to the outer ring area and pumped to the dust collector for purification. However, the raw material preparation system shall be continuous, stable and reliable, with low investment and low power consumption. Flexible process arrangement, compact structure and simple operation. The homogenized value is 5 － 9 and the power consumption is 0.1 － 0.2kwh/t.
Application of continuous homogenizing silo
The continuous homogenizing silo is used to continuously feed raw materials from the top of the silo and discharge raw materials at the same time after aerated mixing. A cylindrical mixing chamber is set in the center of the silo to reduce the unloading pressure in the silo and eliminate hopper flow. 6-12 unloading holes are set around the mixing chamber. 6-12 aeration zones are set between the mixing chamber and the silo wall. During unloading, the materials flow to the central chamber in turn. The materials entering the mixing chamber are further mixed due to continuous inflation in the mixing chamber
CN
EN