Introduction to MF raw meal homogenizing silo

Raw materials of MF warehouse are discharged into the warehouse by distributor and six chutes in radial form, basically forming a horizontal material layer. The bottom of the warehouse is tapered and slightly inclines to the center. There is a central mixing chamber in the middle. The bottom of the warehouse between the central chamber and the warehouse wall is divided into 6-14 inflation zones. Each zone is provided with three inflation chutes and one discharging hole. During discharging, the gas is charged to two opposite zones in turn. There are multiple funnel depressions above the discharging. The funnels are arranged in a row along the diameter and rotate with the exchange of gas inflation. In this way, the gravity mixing is generated. After the raw materials are discharged from the warehouse bottom into the central chamber, the bottom of the central chamber is continuously inflated, making the raw materials get another homogenization. The homogenization principle of the reservoir is based on gravity mixing of material flow, so the power consumption is extremely low, the energy consumption is only 0.432~0.576kwh/t, and the homogenization value is H Up to 7-10, the system has the advantages of high efficiency and energy conservation, low infrastructure investment and simple operation and management.

Technical parameters of MF raw meal homogenizing silo

Usage of MF raw meal homogenizing silo

The raw meal distributor of MF warehouse is mainly applicable to the distribution of cement and raw meal in large, medium and small cement plants.