Introduction to LMDC Low-pressure Pulse Long Bag Dust Collector

Introduction to LMDC Low-pressure Pulse Long Bag Dust Collector:

The working process of LMDC low pressure pulse long bag dust collector is as follows: the dust in the ash hopper is regularly discharged from the ash conveying system. When the dusty flue gas enters the upper part of the ash hopper, the flue gas goes up to the filter bag, the dust is blocked outside the filter bag, the clean flue gas enters the bag and is discharged from the air outlet through the bag mouth and the upper box. When the dust on the filter bag surface increases continuously, causing the equipment resistance to rise to the set value, the micro-pressure difference controller has signal output, (or reaches the set time) the electronic controller will send signal to make the injection system work.

Performance characteristics of LMDC low-pressure pulse long bag dust collector:

1. LMDC low pressure pulse long bag-type dust collector adopts Du special air inlet design technology: the dust collector adopts air inlet flow homogenizing device, coarse particles directly fall into the ash hopper, reducing the damage to the filter bag, homogenizing the air flow entering the bag chamber, and effectively reducing the pressure loss of the dust collector.

2. LMDC low pressure pulse long bag dust collector Long bag design: the dust collector adopts 6m long bag, which greatly reduces the floor area and is beneficial to the site process layout.

3. Low pressure pulse dust removal of LMDC low pressure pulse long bag dust collector: long service life of filter bag and low energy consumption.

4. High-quality filter materials shall be adopted: high-quality filter materials shall be selected according to different flue gas characteristics to ensure the outlet emission concentration ≤ 50mg/Nm3.

5. LMDC low pressure pulse long bag-type dust collector has high filtering air velocity: compared with glass fiber filter bag, it has the advantages of small volume, light weight and small investment.

6. The dust remover can be controlled by timing and fixed resistance, all of which are controlled by PLC, and the operation is stable and reliable.

7. The dust collector is divided into online and offline dust removal states, which can be flexibly used according to the actual needs.

Technical Parameters of LMDC Low-pressure Pulse Long Bag Dust Collector

Technical parameter table of LMDC low pressure pulse long bag dust collector:

Application of LMDC Low-pressure Pulse Long Bag Dust Collector

LMDC low pressure pulse long bag dust collector is mainly composed of upper box, dust discharge device, ash hopper, injection device, middle box and control instrument, which is widely used in building materials, light industry, metallurgy, chemical industry and other industries.