Introduction to clinker bulk loader

The clinker bulk loader is a device that automatically transports clinker (≤50mm) from the storage area to the clinker bulk vehicle or vessel. The cement clinker bulk equipment at the bottom of the storage area mainly consists of a manual rod valve, an electric fan valve, a winch device, an extendable discharge device, a dust collection hose, a capacitive limit switch, an electronic control system, etc. Users can also choose the clinker bulk equipment on the side of the storage area.

Working Principle:

After the transportation vehicle is positioned, open the corresponding number of rod valves. Press the "Lower Button" on the control cabinet, and the lifting motor will automatically power off when the discharge head reaches its position. Press the "Loading Button" to enter the material unloading state, and the auxiliary equipment will start working accordingly. The dust generated by the unloading process passes through the feed hopper and enters the dust collector for purification via the telescopic dust collection hose. When the discharge head is filled with material, it will rise while sounding an alarm. The rising distance needs to be set before loading. If the rising distance is 1 meter, adjust the time relay to T=1/V. During the rising process, loading continues. When the discharge head is full, repeat the above actions. After reaching the full position, press the stop button to apply reverse braking to the electric vibrator, or close the fan valve to stop the discharge process, and other equipment will stop working accordingly. After stopping, press the up button to allow the feed hopper to move away from the material by a certain distance to ensure the movement of the transportation vehicle, and then align it with the second unloading station. Continue until the entire material silo is filled.

Technical parameters of clinker bulk loader

Purpose of clinker bulk loader

The information is currently being supplemented. Please stay tuned